74
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
City/Area Selects a desired country.
If you do not finish the set-up Installation Guide by pressing BACK or if you time out
on the OSD (On Screen Display) the installation menu will continuously appear until the
set up is completed whenever the TV is switched on.
DTV mode control buttons may not function based on country broadcasting
circumstances.
ton yam noitcnuf VTD emos ,dexif t’nsi noitaluger gnitsacdaorb latigiD taht yrtnuoc nI
work depending on digital broadcasting circumstances.
NOTE
Hard of Hearing This function is for the blind, and provides explanatory audio describing the current situation
in a TV programme in addition to the basic audio.
Power Indicator Sets to turn on or off the indicator light on the TV.
Option
Standby Light Set to turn on or off the indicator light in Standby mode.
Power Light Set to turn on or off the indicator light when you turn on the power.
Factory Reset Resets the TV to factory default and erases all stored programmes.
Customizes the TV settings to suit your preference. The factory reset screen will appear
when you turn on the TV for the first time.
In Lock System “On”, if you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on
the remote control handset.
NOTE
Set ID Adds an ID to the connected devices
To Next Page
Loading...
