Copyright 2017 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 12 -
LGE Internal Use Only
#2). Connect HDMI cable and select “Connect” button.
#3). Select “Read” button(1st) and find bin file(2nd) and then check the checksum value(3th).
#4). Select “Auto” button(1st) and confirm the checkbox settings(2nd) and then select “Run” button(3th).
*Please make sure that “File Area” option is selected.
#5). After ISP is completed, do factory reset in the OSD main menu.
To Next Page
Loading...
