■assemble method
1. Assemble with CA+ Module
2. Assemble by latches
1.Put on the rear shield assy on the module
guided by cabinet rib
1.Assemble LVDS cable by hand.
2.Assemble LED driver cable by hand.
1.Assemble the Jog assy and speaker assy
and attach tape 1EA
1. Assemble the B/C and cabinet by latch 1. Assemble screw 4EA back cover with rear sheield
1.Assemble Stand base and Body by
Thumb screw.
General drivers
▣ Tool Description
Gloves
Caution: SVC man must check insulation sheet on the module before assembling the set
1.Assemble Stand assy at back cover
(One click button)
Assemble and disassemble method
To Next Page
Loading...
