Copyright 2017 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 11 -
LGE Internal Use Only
ADJUSTMENT
1. How to Enter the SVC mode
#1) Monitor Power off using the Circle OSD
#2) Move joystick button Left 3 Times and Right 1 Time
#5) DC On (Click the Joystick Power button)
#6) Select the Menu
#7) you can see Service Menu at the top left side and you can get information from it.
2. How to update the F/W” (refer to Next Page)
#1). Connect Mstar Jig to monitor and PC.
To Next Page
Loading...
