PREPARATION
10
PREPARATION
ATTACHING THE TV TO A DESK (32LB9D
**
Only)
If you wish to attach the TV to a desk, it must be securely fastened to the desk using a metal screw (as shown
below).
Failure to securely attach the TV may result in the TV falling: which may cause damage to the TV and serious
personal injury.
1-screw
Stand
Desk
SWIVEL STAND
50/
60PY3DF
**
models
After installing the TV, you can adjust the the TV set manually to the left or right direction by 20 degrees to
suit your viewing position.
NOTE
GG
Before adjusting the angle, you must remove
the cable management and loosen (to the
left) the shaft bolt on the middle of stand’s
back. And when stand be level with TV, you
must close (to the right) the shaft bolt to
set the hole.
To Next Page
Loading...
Need help?
General
