LG 42LC7D - Page 94

10. Color (Command: k i)
To adjust screen color.
You can also adjust color in the Picture menu.
Transmission[k] [i][] [Set ID] [ ] [Data] [Cr]
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgemen_ [i] [] [Set ID] [] [OK/NG] [Data] [x]
1 1. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the Picture menu.
Transmission [k] [j][ ][Set ID][ ][Data] [cr]
Data Red: 0 - Green: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
ACknowledgemen_ [j ] [ ] [Set ID] [ ] [OK/NG] [Data] [x]
12. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k] [k] [] [Set lD][] [Data] [Cr]
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgemen_ [k] [ ] [Set ID][ ] [OK/NG] [Data] [x]
13. OSD Select (Command: k I)
To select OSD (On Screen Display) on/off.
Transmission[k] [I][] [Setl D] [ ] [Data] [Cr]
Data 0: OSD off Data 1: OSD on
Acknowledgemen_ [I] [ ] [set ID] [ ] [OK/NG] [Data] [x]
14. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel controls
on the set.
TransmissiOn[k] [m][] [set ID] [ ] [Data] [Cr]
Data O: Lock off Data 1: Lock on
ACknowledgement[m][] [Set ID] [ ] [OKiNG] [Data] [x]
If you're not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.
15. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission[k] [r][] [Set iD][] [Data] [Cr]
Data Min: 0 _ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown.
Acknowledgement [r] [] [Set ID] [] [OK/NG] [Data] [x]
16. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the Audio menu.
TransmissiOn [k] [s][] [Set iD][ ][Data] [Cr]
Data Min: 0 _ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
A_knowledgemen_ [s][ ][Set ID][ ][OKiNG] [Data] [x]
17. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k] [t][] [Set ID][ ] [Data] [Cr]
Data Min: 0 _ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgemen_ [t] [ ][Set ID] [ ] [OK/NG] [Data] [x]
18. Color Temperature (Command: k u)
To adjust color temperature.
You can also adjust color temperature in the Picture menu.
Transmission[k] [u][] [Set ID][] [Data] [Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
ACknowledgement[u][] [Set I D] [ ] [OKiNG] [Data] [x]
19. Red Adjustment (Command: k v)
To adjust red in color temperature
Transmission [k] [v][] [Set ID][] [Data] [Cr]
Data Min: 0 _ Max: C8
*Refer to 'Real data mapping 2' as shown below.
ACknOwledgement [v] [ ] [Set ID] [ ] [OK/NG] [Data] [x]
20. Green Adjustment (Command: k w)
To adjust green in color temperature.
Transmission [k] [w][] [set ID][] [Data] [Cr]
Data Min: 0 - Max: C8
*Refer to 'Real data mapping 2' as shown below.
Acknowledgement [W][] [set ID][] [OKiNG] [Data] [x]
*Real data mapping 1 *Real data mapping 2
0: Step 0 0:-20
5:-19
A: Step 10 (SET ID 10) A: -18
F: Step 15 (SET ID 15) 5F: -1
10: Step 16 (SET ID 16) 64:0
69:+1
63: Step 99 (SET ID 99)
64: Step 100 C3:+19
C8:+20
m
Z
X
93