LG 65VS10 - Page 52

52
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
07. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping ’. See p.51
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.51
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping ’. See p.51
09. Color (Command: k i) (Video Timing only)
To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.51
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
10. Tint (Command: k j)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step R50
64H : Step G50
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Tint Real data mapping
0 : Step 0 to Red
:
64 : Step 100 to Green
11. Sharpness (Command: k k) (Video input only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’. See p.51
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
12. OSD Select (Command: k l)
To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off Data 01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 00: OSD Off Data 01: OSD On