LG 65VS10 - Page 53

53
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
13. Remote Lock /Key Lock (Command: k m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off Data 01: On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 00: Off Data 01: On
14. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
15. Color Temperature (Command: k u)
To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00 : Medium
01 : Cool
02 : Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 00 : Medium
01 : Cool
02 : Warm
16. Abnormal state (Command: k z)
Used to Read the power off status when Stand-by
mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data 00 : Normal (Power on and signal exist)
01 : No signal (Power on)
02 : Turn the monitor off by remote control
03 : Turn the monitor off by sleep time function
04 : Turn the monitor off by RS-232C function
08 : Turn the monitor off by off time function
09 : Turn the monitor off by auto off function
17. ISM mode (Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. Auto Configure (Command: j u)
To adjust picture position and minimize image
shaking.
Automatically. NB : Only applies to RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]