LG A9K Series User Manual

16
INSTALLATION
Installing the Charging
Station
Self-Standing Installation
Follow the steps below to install the charging
station on a hard and level floor.
1 Place the floor stand dock on a hard and level
floor and assemble the floor stand pipe.
2 Clip the power cord tidily into the cord keeper
a on the back of the floor stand pipe.
3 Slide the detachable nozzle storage onto the
floor stand pipe.
• Make sure not to pinch or tangle the power
cord behind the mop pads storage.
4 Assemble the charging station onto the top of
the floor stand pipe.
5 Connect the power adapter to the port on the
back of the charging station.
6 Drill a hole in the wall and insert the drywall
anchor
b if needed.
• Before drilling, make sure that there are no
pipes or electrical wires inside the wall at the
desired location.
• For drywall anchor: use 1/4″ (6.5 mm) drill bit
• For concrete or wall stud: use 1/8″ (3 mm)
drill bit
• If screwing into drywall, use the drywall
anchor.
7 Align the wall anchoring block c of the
charging station, and fix the charging station

LG A9K Series Specifications

General

Battery Type	Lithium-Ion
Charging Time	4 hours
Telescopic Wand	Yes
Power Source	Battery
Type	Stick Vacuum Cleaner
Dust Capacity	0.44 L
Weight	2.7 kg
Filter Type	HEPA Filter
Filtration System	5-step filtration
Nozzles Included	Crevice Tool
Features	5-Step Filtration System
Category	Stick Vacuum Cleaner
Washable Components	Filter
Model	A958SA, A957SA, A957SMA, A958SMA, A958TSA, A958XMS, A958XHS (and other A9K series models)