40
MAINTENANCE
• Do not wash the product body or motor with
water.
7
Turn the product body over and lift the
Kompressor lever
f
up to clean the inside of
the working plate with the provided cleaning
brush.
• Do not push the Kompressor lever down
hard. The working plate may be damaged.
8
Turn the product body over again and shake it
while pressing down the lever to remove the
dust.
9
Wrap the provided cleaning brush with a wet
paper towel, tucked into the slots
g
on the
handle.
10
Turn the product body over, lift the
Kompressor lever
h
up, and clean the inside of
the working plate with the towel-wrapped
brush handle.
Cleaning the Filters
Clean the exhaust filter and the pre-filter when the
filter cleaning icon
K
lights up.
• Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
1
Remove the battery from the product body.
2
Rotate the exhaust filter
a
to the unlocked
position
b
to separate it from the product
body.
3
Grip the exhaust filter cover
c
and the exhaust
filter
a
using both hands and rotate the
exhaust filter cover while pressing the
PUSH
To Next Page
Loading...
Need help?
General
