2
ENGLISH
Safety Precautions
y For electrical work, please have an electrician do the work based on the installation
manual and specified circuit diagram.
Using an unsuitable cord, or having a non-professional work on the electricals may result in fire
or electrical shock.
y Do not place the product near a fire source.
It may result in the product catching fire.
y If the product is installed in a hospital or a communication base station, provide
sufficient protective equipment against electrical noise.
The product may malfunction or other products may work abnormally.
y Securely install the product.
If the product is not secured during installation, it may fall or malfunction.
y Read the manual thoroughly to correctly install the product.
If not, an incorrect installation may cause fire or electric shock.
y When wiring the product, do not use a non-standard cable, nor extend the cable
excessively.
It may cause a fire or electric shock.
y Securely install the power cord and communication cable.
An unsecure installation may result in a fire or electric shock.
y Do not connect the power cord to the communication terminal.
It may cause a fire, electric shock, or a product malfunction.
y Do not install the product in an area near combustible gas.
It may result in fire, electric shock, explosion, injury, or a malfunctioning of the product.
To Next Page
Loading...
