LG AC Smart Premium PQCSW421E0A - Time-limit Operation; Configuring Time-Limit Operation

68
ENGLISH
Using the Program
Checking Peak Control Status
You can check the Peak Control configuration status as follows.
1. In the main menu, touch the [AutoLogic > Peak Control] menu icon.
2. Check how Peak Control is configured.
Item Description
Control
Configuration
Area
Configure Peak Controls.
y Operation Status
- Can be configured in [Environment > Advance Setting].
- Priority: Controls based on group priority
- Outdoor unit capacity control: Controls based on outdoor unit
capacity limit.
(Operation Status - Priority Control selected)
y Operation
- [
Run] Button: Operates the device.
- [Stop] Button: Stops the operation of the device.
y ShiftTime(Min.): The cycle by which the operation switches over.
y Target ratio(%): Displays the target operation rate.
y Current Running(%): Displays the current rate.
(Operation Status - Outdoor unit capacity control selected)
y Operation
- [Run] Button: Operates the device.
- [Stop] Button: Stops the operation of the device.
y Target ratio(%): Displays the target operation rate.