34
ENGLISH
Using the Program
Indoor unit fine control
Item Description
Operation
y [ON] Button: Starts the operation of the device.
y [Off] Button: Stops the operation of the device.
Set Touch >Ÿ@/>ź@ to set the temperature.
Mode
y [COOL] Button: Operates with Cooling Mode.
y [HEAT] Button: Operates with Heating Mode.
y [AUTO] Button: Evaluates the operating environment conditions and
automatically sets the optimum mode.
y [DRY] Button: Dehumidifies during rainy seasons or whenever humidity is
high. You cannot set the temperature in this mode.
y [FAN] Button: Fan runs without temperature control to clean the air. You
cannot set the temperature in this mode.
Fan Speed
y [LOW] Button: Slow fan speed.
y [MED] Button: Medium fan speed.
y [HIGH] Button: Fast fan speed.
y [AUTO] Button: Loops from Low to Medium to High speeds.
Swing
y [Set] Button: Turns on automatic oscillation of the louvers.
y [Clear] Button: Turns off automatic oscillation of the louvers.
Filter Alarm
Touch the Disable button to deactivate the filter exchange alarm.
(For other models, it may not work properly.)
To Next Page
Loading...
