61
ENGLISH
Using the Program
Editing Groups
The auto logic designates the registered devices as a group and controls them by group. The
following explains how to create groups and how to edit the created groups.
Adding Groups
You can create a group as follows.
1. In the main menu, touch the [AutoLogic > Peak Control] menu icons.
2. Touch the [Edit Group] button.
The screen converts to Edit Group.
3. Touch the [Add Group] button.
Notes
By touching [Apply default group], you can create a group automatically based on the
group and indoor unit configuration set in the Device Management menu.
4. When the window to input a group name is displayed, use the touch keyboard to enter a group
name and touch the [Confirm] button.
The group is added to the group list.
5. In the group list, touch the group added in Step 4.
To Next Page
Loading...
