37
ENGLISH
Using the Program
ERV Fine Control
Item Description
Operation
y [ON] Button: Starts the operation of the device.
y [OFF] Button: Stops the operation of the device.
Set Touch >Ÿ@/>ź@ to set a desired temperature (the ERV is not activated).
Mode
y [AUTO] Button: Evaluates the operating environment conditions and
automatically sets the optimum temperature.
y [HEX] Button: Air supply and emissions are all ventilated through the heat
exchanger.
y [NORMAL] Button: Ventilate emissions without passing through the heat
exchanger.
Fan Speed
y [LOW] Button: Slow fan speed.
y [HIGH] Button: Fast fan speed.
y [SUPER] Button: Maximum fan speed.
y [AUTO] Button: Loops from Low to Medium to High speeds.
Partial Lock
y [Set] Button: Disables remote control for all features.
y [Clear] Button: Disable the lock.
Additional
Function
y [Drift] Button: Reduces energy consumption by operating in the most
efficient method possible.
y [Quick] Button: Operates at maximum performance to prevent the room's
contaminated or humid air from entering other spaces.
y [Clear] Button: Disables power saving / rapid operation.
y [Heater On] Button: Enables the heater function to heat the room.
y [Heater Off] Button: Disables the heater function.
Some additional function might not be provided according to your country
such as U.S.
To Next Page
Loading...
