69
ENGLISH
Using the Program
Demand Control
After observing changes in power consumption, this feature can prevent power consumption from
exceeding a set limit. If you set the demand control and the program predicts that power consumption
will exceed that limit, it will begin deactivating less important devices to save energy.
Notes
y
For demand, depending on the installation site specifications, either the peak control or
demand control functions can be selected. Go To Environment > Advance Setting > Peak/
Demand Settings and select a desired control type.
y
For outdoor capacity control, depending on the installation site specifications, either the peak
control or demand control functions can be selected.
y
In the Demand Control menu, you can only check the Demand Control status. You cannot
configure the operation, operation switchover cycle, desired rate, current rate, etc.
Notes
AC Smart Premium can be used with the LG demand controllers (PCP-D11A2J), but not with the
demand controllers from other manufacturers.
To Next Page
Loading...
