66
ENGLISH
Using the Program
Number Item Description
¤
Control
Configuration
Area
(Operation Status - Priority Control selected)
y Operation
- [Run] Button: Operates the device.
- [Stop] Button: Stops the operation of the device.
y Shift Time(Min.): Touch >Ÿ@/>ź@ to set the time in
minutes to force the operation to switch over.
y Target ratio(%): Touch >Ÿ@/>ź@ to set the target rate.
y Current Running(%): Displays the current rate.
(Operation Status - Outdoor unit capacity control selected)
y Operation
- [Run] Button: Operates the device.
- [Stop] Button: Stops the operation of the device.
y Target ratio(%): Touch >Ÿ@/>ź@ to set the target rate.
¥
[Edit Group]
Button
Edit a control group.
¦
[Cancel] Button Cancels control configuration.
§
[Apply] Button Applies control configuration.
3. To complete configuration, touch the [Apply] button.
To Next Page
Loading...
