79
ENGLISH
Using the Program
5. In the non-registered device area, touch a device to be registered and touch the [Add] button.
6. In the input device list, touch the device you want to trigger control.
7. Select a control status in the control configuration area.
8. Click the [Output Device] tab.
9. In the non-registered device area, touch a device to be registered and touch the [Add] button.
10. In the output device list, touch the device you want to control.
11. Select a control status in the control configuration area.
12. To complete the adding of a pattern, touch the [Apply] button.
To Next Page
Loading...
