To Next PageTo Next PageWhat causes an inverter compressor overcurrent in an LG AHNW166T0 Air Conditioner and how to fix it?
If your LG Air Conditioner shows an inverter compressor overcurrent error, it could be due to an increase in the inverter compressor CT value. Check the CT value and make sure it's within the specified limits.
What to do if my LG Air Conditioner displays a water outlet temperature sensor error?
If your LG Air Conditioner is showing a water outlet temperature sensor error, it means the water outlet temperature sensor is either disconnected or short-circuited. To fix this, you should check the connections of the water outlet temperature sensor.
How do I fix a water inlet temperature sensor error on my LG Air Conditioner?
If your LG Air Conditioner displays a water inlet temperature sensor error, it indicates that the water inlet temperature sensor is either disconnected or short-circuited. To resolve this, check the connections of the water inlet temperature sensor.
What causes a water tank temperature sensor error on an LG AHNW166T0 and how can I fix it?
A water tank temperature sensor error in your LG Air Conditioner means that the water tank temperature sensor is either disconnected or short-circuited. The solution is to check the connections of the water tank temperature sensor.
What does it mean when my LG AHNW166T0 displays a water inlet and outlet temperature sensor error?
If your LG Air Conditioner shows a water inlet & outlet temperature sensor error, it means that both the water inlet and outlet temperature sensors are either disconnected or short-circuited simultaneously. To resolve this, you should check the connections of both temperature sensors.
How do I troubleshoot an inverter compressor discharge pipe temperature sensor defect in my LG Air Conditioner?
If there is an inverter compressor discharge pipe temperature sensor defect in your LG Air Conditioner, it indicates the discharge temperature sensor is either disconnected or short-circuited. Check the connections of the discharge pipe temperature sensor.
What to do if there is no communication between my LG AHNW166T0 wired remote controller and the indoor unit?
If there is no communication between the wired remote controller and the indoor unit of your LG Air Conditioner, it could be because the remote controller isn't receiving a signal from the indoor unit. To resolve this, first, ensure that the wired remote controller is functioning correctly. Then, check all the connections to make sure they are secure.
What does an inverter heatsink temperature sensor defect mean on my LG AHNW166T0 Air Conditioner?
If your LG Air Conditioner shows an inverter heatsink temperature sensor defect, it means that the heatsink temperature sensor is either disconnected or short-circuited. You should check the connections of the heatsink temperature sensor to resolve this.
How to fix a low pressure sensor defect of the inverter compressor in my LG AHNW166T0 Air Conditioner?
If your LG Air Conditioner shows a low pressure sensor defect for the inverter compressor, it indicates that the low pressure sensor is either disconnected or short-circuited. To resolve this, check the connections of the low pressure sensor.
What causes a high pressure sensor defect of the inverter compressor in an LG AHNW166T0?
If your LG Air Conditioner displays a high pressure sensor defect for the inverter compressor, it means the high pressure sensor is either disconnected or short-circuited. To fix this, check the connections of the high pressure sensor.
General| Brand | LG |
|---|---|
| Model | AHNW166T0 |
| Category | Air Conditioner |
| Language | English |
