To Next PageTo Next PageWhy is my LG AR702BR Receiver remote control not working?
If the remote control for your LG Receiver isn't working, the batteries may not be loaded or exhausted (replace the batteries). Alternatively, the remote sensor might be obstructed (remove the obstacle).
Why is there no sound from my LG Receiver?
If there is no sound from your LG Receiver, it could be due to several reasons: the speaker wires may be disconnected (check the speaker connections); the MASTER VOLUME may be too low (adjust the MASTER VOLUME); the MUTE button may be on (press the MUTE button to cancel the muting effect); the selected decoding mode may not match the input signal format (select the available decoding mode); the input source may be incorrectly selected (select the desired input source correctly); there may be incorrect connections between the components (make connections correctly); or the USB cable may be separated during playing a file on the PC-LINK mode (execute a media player again).
What to do if my LG Receiver has no power?
If your LG Receiver has no power, the AC input cord might be disconnected (connect cord securely). Also, there could be a poor connection at the AC wall outlet, or the outlet might be dead or off (check the outlet using a lamp or another appliance).
How to fix poor FM reception on my LG AR702BR?
To fix poor FM reception on your LG Receiver, make sure an antenna is connected (connect an antenna). Also, the antenna may not be positioned for the best reception (change the position of the antenna).
Why are stations not received on my LG AR702BR Receiver?
If stations cannot be received on your LG Receiver, it may be because no antenna is connected (connect an antenna). It could also be that the desired station frequency is not tuned in (tune in the desired station frequency), or the antenna is in the wrong position (move antenna and retry tuning).
Why is there no sound from the surround speakers on my LG Receiver?
If there is no sound from the surround speakers on your LG Receiver, it could be because surround mode is switched off (normal stereo mode) - select a surround mode. It may also be that the MASTER VOLUME and surround level are too low - adjust MASTER VOLUME and surround level. Another reason could be that a monaural source is used - select a stereo or surround source. Finally, the surround speaker setting might be set to “NONE” - select the desired surround speaker setting.
What to do if preset stations cannot be received on LG AR702BR Receiver?
If preset stations cannot be received on your LG Receiver, an incorrect station frequency may have been memorized (memorize the correct station frequency). Alternatively, the memorized stations may have been cleared (memorize the stations again).
Why is there no sound from the surround center speakers on my LG AR702BR Receiver?
If you're not getting any sound from the surround center speakers on your LG Receiver, the input signal format or the current surround mode may not support the 6.1 surround (under the proper situations, perform the 6.1 surround playback). Also, the MASTER VOLUME and surround center level might be too low (adjust MASTER VOLUME and surround center level).
Why is there no sound from the front center speaker on my LG AR702BR?
If there is no sound from the front center speaker on your LG Receiver, it may be because Dolby Virtual, normal stereo mode, etc is selected (select the desired surround mode). Alternatively, the MASTER VOLUME and center level may be too low (adjust MASTER VOLUME and center level).
Guidance on initial setup, connections, symbols, and required cables.
Description of the unit's front controls and indicators.
Identification of rear panel input/output jacks.
Remote operation range, battery, and component mode selection.
Guide for connecting digital and analog sources.
Guidance on connecting and positioning speakers.
Turning on, using headphones, and Audyssey 2EQ setup.
How to choose sources, input modes, and mute sound.
Details on listening modes, DSP, and sound parameter adjustments.
Common problems and their solutions.
Detailed specifications for the unit and speakers.
Guidance on initial setup, connections, symbols, and required cables.
Description of the unit's front controls and indicators.
Identification of rear panel input/output jacks.
Remote operation range, battery, and component mode selection.
Guide for connecting digital and analog sources.
Guidance on connecting and positioning speakers.
Turning on, using headphones, and Audyssey 2EQ setup.
How to choose sources, input modes, and mute sound.
Details on listening modes, DSP, and sound parameter adjustments.
Common problems and their solutions.
Detailed specifications for the unit and speakers.
General
