9
Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Art Cool Mirror (Gen 2) Wall-Mounted Indoor Units
• Installation plate (One [1] Each)
• Type “A” screws (Four [4] Each)
• Plastic anchors (Four [4] Each)
• Type “B” screws (Two [2] Each)
Standard and Art Cool Mirror (Gen 4) Wall-Mounted Indoor Units
• Installation plate (One [1] Each)
• Type “A” screws (Five [5] Each)
• Plastic anchors (Five [5] Each)
• Type “B” screws (Two [2] Each)
Required Parts (factory provided) Required Parts (field provided)
• Connecting cable (power and control)
• Pipes - vapor line and liquid line, with insulation
• Additional drain hose
Art Cool Gallery (Gen 4) Indoor Units
• Installation guide (One [1] Each)
• Type “A” screws (Four [4] Each)
• Plastic anchors (Four [4] Each)
• Level
• JIS and other screwdrivers
• Electrical lineman pliers
• Electric drill
• Holesaw
• Drill
• Flaring tool set
• Tubing cutter
• Tube/pipe reamer
• Torque wrenches
• Allen wrench
• Gas-leak detector
• Thermometer
Required Tools (field provided)
INTRODUCTION
To Next Page
Loading...
Need help?
General