LG CF3D User Manual

Installing and Composition
15
Selecting Input Mode
1. Press the INPUT button.
2. Selecting an input signal with the INPUT button will only change the projector only to connected inputs. You
can change it to any inputs with the ˘, ˚ button.
• Selecting an input signal with the VIDEO, COMP, RGB, HDMI1, HDMI2 and HDMI3 buttons.
Input
ComponentVideo RGB HDMI 1 HDMI 2 HDMI 3
When an image appears on the screen, check if it is in focus and fits the screen properly.
When you need to move the screen image up or down, use the zoom ring on the projector to adjust the height as shown
below.
• To adjust the focus of the image, rotate the focus ring.
• To adjust the size of the image, rotate the zoom ring.
• Turn the Lens shift dial left or right to adjust the projector image up or down.
• Turning the Lens shift dial with excessive power may cause damage to the projector.
Focus and Position of the Screen Image
Focus Ring
Zoom Ring
Lens shift Dial

LG CF3D Specifications

General

Brand	LG
Model	CF3D
Category	Projector
Language	English