Connection
16
Connection
Connecting to a Desktop PC
* You can connect the projector to a computer with VGA, SVGA, XGA, SXGA output.
* Refer to page 33 for resolutions the projector supports.
< How to connect >
Connect the RGB IN of the projector and the RGB out-
put port of the computer with a computer cable.
* You may have to change the resolution that your PC
exports to one supported by the projector. Refer to page
33. This projector may not support output from laptops
when the laptop screen is on.
Connecting to a Video Source
< How to connect >
Connect the VIDEO of the projector to the output jack of
the video source with a video cable.
* You can connect a VCR, a camcorder or any other compatible video image source to the projector.
< VCR >
Video Cable
Computer Cable
Computer Cable
To Next Page
Loading...
Need help?
General