Function
29
*
5#♾⩮⟮#⢫❓㘆#6G#surmhfwru♺⇆#6G#⚫Ⅻ#⎆ⵗ⎆#⤶2❚⠂#᳇ᨦ#⠺ᒃ⟦ᤆ#᪈⸾♞#⦦ጾ#ፏ⟦ᤆ#⎆ⵗ⎆#ኲ⠂#㗦ᤆᑮᨦ#
∶⎆⿆#㑢◲㘆#6G#⚫Ⅻ#⎆ⵗ⟮#ಪፏ㘂ശ#㘓፲ᎎ1
1. Press the MENU button. Then, move to OPTION with the
ġ, Ģ, ˘, ˚ buttons and press the OK button.
2. Press the ġ, Ģ buttons to move to Camera Calibration
and press the OK button.
3. Press the ˘, ˚ buttons to move to On.
4. Press the ġ, Ģ buttons to move to Calibration Start and
press the OK button.
• ⠞#㖮ᤆ⣇㇚ጾ#6G#ถ㚮⟮#➮㘞#㖮ᤆ⣇㇚#ᅞḪ♺#5ೆ⠂#♾⩮⟦ᤆ#ถ⇛ᓂ♞#⠲⍟፲ᎎ1#6G#⚫Ⅻ#⎆ⵗ⎆#ኲ⠂#㗦ᤆᑮ
ᨦ#⦮⠞#➮㘞⇆ጾ#⤶2❚◲⠂#᳇ಪ#⟊⅖㘞☦#㘓፲ᎎ1
• Camera Calibration +⠺ᒃ#᳇#⤚⢿,#ፏ⟪#6G#⚫Ⅻ#⎆ⵗ⎆♺᩶#⢫❓ᓂጾ#ፏ⟦ᤆ#5G#⚫Ⅻ#⎆ⵗ⎆♺ጾ#㛾ᬞ♺#
ᵪ㛾ಪ#♰⍟፲ᎎ1#
• ⦦➮#⤚ᬯ⠞#ᆲᯞ#᳇ചᅂ#73⠢⼂#⠞㘂♺⇆#⤚⢿㘂ጾ#൧❚♺ጾ#⠺ᒃ#᳇#⤚⢿⠞#ᓂ⩪#◴⟮#⋂#⠲⍟፲ᎎ1#⠞ᗶጾ#㛾
ᬞ♺#ᅂㅪᅂጾ#൧ඊ#ᯢถᨦ#Ⳣඊ㘞#⦦⎆#Ჾᠷ፲ᎎ1#
• ⢮❺⟮#⿆ඊ#8Ḯ⠞#⩪ᅆ#㝮#ᒃ⠻ᓓ፲ᎎ1
• Press the BACK button to exit the menu screen.
To Calibrate the Camera
OPTION
Menu Language : English
Blank Image : Blue
Camera Calibration ᰷
Lamp Mode : Normal
High Altitude
Network Setting
Input Label
Power Sound : On
ᰰMove ᰷OK
1. Press the Q.MENU button on the remote control.
2. Press the ˘, ˚buttons to move to Lamp Mode.
3. Move to a desired item with the ˘, ˚ buttons.
• Lamp⠂#⛒ᑮಪ#35°C⠞Ⅻ⠞ചᅂ#3D mode ᒃ⠻⎆♺ጾ#⇊ㆇᓂ⩪#◴⍟፲ᎎ1
• You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.
To Adjust the Brightness of the Lamp
Lamp Mode
Economic
ᯧ
On
ᯓ
Calibration Start
Close
Camera
To Next Page
Loading...
Need help?
General