LG CF3D User Manual

Function
31
OPTION
Menu Language : English
Blank Image : Blue
Camera Calibration
Lamp Mode : Normal
High Altitude
Network Setting
Input Label
Power Sound : On
ᯝ
ᰰMove ᰷OK
< How to use >
1. Press the MENU button. Then, move to OPTION with the
ġ, Ģ, ˘, ˚ buttons and press the 󲄇OK button.
2. Press the ġ, Ģ buttons to move to Network Setting and
press the 󲄇OK button.
3. Press the ˘, ˚ buttons to move to On of LAN option.
4. Press the ġ, Ģ buttons to move to IP Auto Setting or IP
Manual Setting press the 󲄇OK button.
• ⇆ᴮ❓#SFጾ#IP Auto Setting ⟮#⇊ㆇ㘓፲ᎎ1
• ⠦᳂#SFጾ#IP Manual Setting ⟮#⇊ㆇ㘓፲ᎎ1
#0#Setting PC SF⠂#⠢㇚ᇡ#㖮ᤆ㉊〆+WFS2LS,⟮#⠮⠂ᤆ#⇎⢿㘓፲ᎎ1
Setting Projector=# IP Address♺ጾ#SF⠂#Gatewayᨦ#Gateway♺ጾ#SF⠂#IP
Addressᨦ#⠯ᣏ㘆#㝮#Closeᨦ#⇊ㆇ㘂⇢✾1
:: example ::
IP Address Subnet Mask Gateway
PC
192.168.0.1 255.255.255.0 192.168.0.254
Projector 192.168.0.254 255.255.255.0 192.168.0.1
• If Network Setting is not working, check your network conditions. Check the LAN
cable connection.
• If the Network Setting is not completed, network may not operate normally.
• IP Auto Setting: Select it if there is a DHCP (Dynamic Host Configuration Protocol) server on the local area network
(LAN) via wired connection, the Projector will automatically be allocated an IP address. The IP
address will automatically be determined. ᳓㛾ᵧ⠞#⇎⼂ᓂ♞#⠲ጾ#൧❚ᅂ#⾞㖒㇚⠂#໚⤯♺#ᗚᠦ#
GKFS#⇆ᴮ⛪#⚚൚ᓂ⩪#◴⟮#⋂#⠲⍟፲ᎎ1
IP Manual Setting: Select it if there is no DHCP server on the network and you want to set the IP address manually.
• Press the BACK button to exit the menu screen.
< How to connect >
Connect the LAN of the projector and the LAN port
of the PC or network.
LAN Cable
< PC >
< Router >
Connecting PC
Close
IP Auto Setting
IP Manual Setting
Network does not exist.
Do you want to reset?
LAN
ᯧ
Off
ᯓ
< When select IP Manual Setting >
,3$GGUHVV
᰺
    
ᯝ
6XEQHW0DVN
   
*DWHZD\
   
&ORVH
ᰯMove ᰷OK

LG CF3D Specifications

General

Brand	LG
Model	CF3D
Category	Projector
Language	English