BASIC FUNCTIONS
Turning the Phone On and
Off
Turning the Phone On
1)Install a charged battery pack or
connect the phone to an external
power source such as the cigarette
lighter charger, car kit or AC Adaptor.
2)Hold down the Key for 3 seconds
until the LCD screen flashes.
Turning the Phone Off
1)Press and hold until the display
turns off.
Making a Call
Every time you make a call, follow these
steps:
1) Make sure that the phone is turned
on. If not, hold down for 3
seconds.
2) Type the phone number and then
press .
G
If the phone is locked, type the lock
code.
3) To end the call press .
BASIC FUNCTIONS
24
Note
As any other communication device,
avoid any unnecessary contact with
the antenna while your phone is
turned on.
Note
In no service area, appears from
the screen. When trying voice call in
no service area, “ No service area” is
displayed. It means you are in no
service area.
ID90C_Eng 9/22/06 5:24 PM Page 24
To Next Page
Loading...
