LG Chocolate - Paired Devices

71
7.2 Paired devices
Pairing is the process that allows the
handset to locate, establish, and register
1-to-1 connection with the target
device.
For pairing new Bluetooth
®
device
1. Follow the Bluetooth
®
accessory
instructions to set the device to
pairing mode.
2. Press Soft Key 1
Menu , , ,
.
Set the desired device to pairing.
Press Soft Key 2
Search .
3. If Bluetooth
®
power is set to off, you
will be prompted to turn power on.
Select
Ye s and press .
4. The device will appear in Add New
Device menu once it has been
located. Highlight the device and
press .
5. The handset will prompt you for the
passcode. Consult the Bluetooth
®
accessory instructions for the
appropriate passcode (typically
“0000” - 4 zeroes). Enter the
passcode and press .
6. Press to connect with the
device.
7. Once connected, you will see the
device listed in the Paired Devices
menu and the Bluetooth
®
device
connected icon will show up on
your enunciator when connected to
the Bluetooth
®
device. You can also
check out the connection with a
orange icon on the list.
MENU FEATURES
ID90C_Eng 9/22/06 5:24 PM Page 71