25
Receiving Calls
1) When the phone rings or vibrate (if
the Vibrate Mode is enabled), press
any key (except ) or
depending on the Call settings.
G
When you press once, when a call
is received, the phone stops ringing
or vibrating depending on the mode
it is in. Press to reject incoming
call.
2) To end an answered call press .
Signal Strength
If you’re inside a building, being near a
window may give you better reception.
You can see the strength of your signal
by the signal indicator ( ) on your
phone’s display screen.
About the antenna
Your phone has a built-in antenna. As
with any other radio transmitting device,
do not touch the antenna unnecessarily
when the phone is switched on.
Contact with the antenna affects call
quality and may cause the phone to
operate at a higher power level than
needed.
Not touching the antenna during a call
optimizes the antenna performance and
the talk-time of your phone. Normal
position: Hold the phone as you would
any other telephone.
BASIC FUNCTIONS
ID90C_Eng 9/22/06 5:24 PM Page 25
To Next Page
Loading...
