BASIC FUNCTIONS
Quick Adjust
Adjusting Vibrate Mode
Use Vibrate Mode in a public place.
1) In standby mode, activate Vibrate
Mode quickly by pressing the
(for 2 seconds) instead of using the
Menu function.
G
When Vibrate Mode is set, Key tone
does not sound.
Select Profiles
1) In standby mode, press .
2) Select one of four Profiles Silent
mode, Vibrate Only, User mode,
Power mode with .
3) Press .
Select Shortcut
1)In standby mode, press to
select Shortcut.
2)Select the item of choice with
and then press .
Call waiting
Your cellular service may offer a call
waiting function. While a call is in
progress, you may hear two beeps
indicating another incoming call. When
call waiting is enabled, you may put the
active call on hold while you answer the
other incoming call. Check with your
service provider for information about
this function.
1) Press to receive a waiting call.
2) Press again to switch between
calls.
BASIC FUNCTIONS
26
Note
To cancel Vibrate Mode, press
for 2 seconds.
ID90C_Eng 9/22/06 5:24 PM Page 26
To Next Page
Loading...
