LG Chocolate - CONTACTS; 1. New Contact

61
3. Press PIN code request .
4. Select
Enable / Disable by using
then press .
5. After selecting Enable, enter 4~8
digits PIN number and press .
4.2 Change PIN code
Change PIN code is a function that
enables changing of the PIN number,
which is saved in the card. Initially, old
PIN is confirmed when this function is
selected and, if correct PIN is entered,
then followed by entering new password
for 2 times. If the new password entered
for 2 times do not match each other, a
message notifies so and new password
shall be entered again. Initial PIN
number differs depending on the card
manufacturer.
1. Press Soft Key 1
Menu , , .
2. Enter the four-digit Lock Code.
3. Press
Change PIN code .
4.3 Lock phone
Keeps your phone from unauthorized
use. Once the phone is locked, it is in
restricted mode, until the lock code is
entered. This will allow you to receive
phone calls and still make emergency
calls. If you need to modify the lock
code, you may modify it using the new
lock code within the security set menu.
1. Press Soft Key 1
Menu , , .
2. Enter the four-digit Lock Code.
3. Press
Lock phone .
4. Select
Enable / Disable by using
then press .
MENU FEATURES
ID90C_Eng 9/22/06 5:24 PM Page 61