-15-
How to use
2
Put the battery in the auxiliary charging station.
보조 배터리
충전 지시등
Charging indicator of
the auxiliary battery
Please note
•
Make sure that the power adapter is connected to both
the charging station and the power outlet
•
While the main battery is charged on the charging sta-
tion, the auxiliary battery will start to be charged after
the main battery is fully charged.
•
The auxiliary battery indicator flashes when charging
starts.
•
The indicator will stay on when the auxiliary battery is
fully charged.
Power / Strength button
You can adjust the suction strength with the strength
button on the body. The product does not switch from
standard mode to turbo mode immediately.
Turbo
(3sec)
1
2
1
Power on/off button
2
Mode button
•
Press “+” once to enable Power mode.
•
Press and hold “+” for more than 3 seconds to
enable Turbo mode.
•
Press “-” to switch from Turbo to Power, or from
Power to Standard.
Please note
Battery life per mode (After full charge)
•
Standard: 40 minutes
•
Power: 9 minutes
•
Turbo: 6 minutes
Charging the product
1
Put the product in the charging station.
•
The battery indicator starts to flash and charging
will start in 3 steps.
2
The battery indicator starts to flash and charging
will start.
•
The indicator will stay on when the battery is fully
charged.
Care
•
Make sure to fully fit the product in the station. Other-
wise, the product may fall and get damaged.
Please note
•
The batteries need to be fully charged for the first
usage after purchase as they are not charged.
•
The battery indicator will flash if the product is fully
charged, removed from the station, and charged again
soon. The flashing stops soon, and the indicator stays
on.
Charging auxiliary battery
1
Hold the product and pull the battery by pressing
both ends of the battery.
To Next Page
Loading...
