-16-
How to use
Using inlet port
•
Please note that the following are applied to the corre-
sponding models:
•
The inlet can be attached to the product body or the
extension pipe.
•
Use a different mode if the inlet gets stuck on the floor,
carpet, or bedclothes or if you need a more powerful
mode.
Care
•
Do not use the product for purposes other than clean-
ing.
Floor inlet
•
It is suitable for cleaning general floors.
Carpet inlet
•
It is suitable for cleaning carpets or rugs.
•
It can be used to clean floors but may generate some
noise; thus, we recommend using a suitable inlet.
Care
•
Do not use this inlet as play mat for children.
•
Any foreign object sucked during cleaning in the inlet
will stop the inlet in order to prevent damage to the
body or inlet. Remove the object before resuming
cleaning.
Bedclothes inlet
•
This inlet lets you clean bedclothes more easily.
•
Attach it to the extension pipe.
Blade shaped inlet port
It is suitable for cleaning dust in a corner or a narrow
space.
Mattress inlet
•
Use this tool when cleaning mattress.
Hard Dirty inlet
•
Use this tool when cleaning all dust stuck on the floor.
2 in 1 inlet port
The accessory inlet port is helpful for cleaning a corner or
small gap.
Basic
For cleaning flat surfaces such as a sofa or mattress.
Brush type
For cleaning delicate surfaces such as a frame or furniture.
Button
Care
•
Using the product for a long time with the accessory
inlet port attached may overburden the motor.
•
Using the accessory inlet port on a TV, monitor or LCD
display may leave a scratch on the surface.
•
Avoid getting your finger stuck in a gap.
•
Any foreign object sucked during cleaning in the inlet
will stop the inlet in order to prevent damage to the
body or inlet. Remove the object before resuming clean-
ing.
To Next Page
Loading...
Need help?
General
