-17-
How to use
Cleaning the dust bin
1
Remove the battery from the product before
cleaning.
2
Please move close to a wastebasket or where
dust/foreign object can be emptied easily.
3
Press the dust bin button downward to open it.
•
Empty the bin.
•
Be careful as dust/foreign object may spill when
you open the dust bin.
Dust bin button
4
Insert the blade-shaped inlet into the large dust
separation device and turn counterclockwise to
remove it.
5
Wash the dust separation device with running
water.
•
Be sure to dry the device completely before
using it.
Large dust
separation
device
6
Remove the dust separation device and use the
2-in-1 inlet port to clear the dust inside the dust
bin.
2 in 1 inlet port
Warning
•
Never wash the product’s body with water. Water may
reach the motor and cause electric shock or fire.
•
Do not apply force or shock on the dust net of the dust
separation device. The net may get damaged.
•
Use the product only after cleaning the dust separation
device and assembling it back on the product. Operat-
ing the product without assembling the device back on
the product will damage the product.
Cleaning filters
The pre-filter and exhaust filter need to be cleaned at
least monthly to maintain the cleaning performance of
the product.
1
Turn the exhaust filter counterclockwise to re-
move it and take out the pre-filter.
Exhaust lter
Pre-lter
2
Use the 2-in-1 inlet to clear dust from the motor
part.
2 in 1 inlet port
To Next Page
Loading...
Need help?
General
