-18-
How to use
3
Brush dust off from the exhaust filter.
•
Make sure to clean the exhaust filter every
month to ensure optimal cleaning performance.
Care
•
Do not wash the exhaust filter with water.
4
Clean the pre-filter by brushing dust off or with
running water.
•
Washing the pre-filter with water and not
completely drying, it may cause it to smell. Make
sure to use it after drying it completely.
•
The more often the filters are cleaned, the more
optimal the suction power will be.
•
Filters are consumables.
•
Please purchase more filters at our authorized
service center.
5
Attach the pre-filter first followed by the exhaust
filter to fit the white circle and turn it clockwise.
Warning
•
Never wash the product’s body with water. Water may
reach the motor and cause electric shock or fire.
•
Make sure that no foreign object reaches the motor. It
damages the product or causes explosion or fire.
•
Do not insert a finger or a sharp object where the mo-
tor is. It damages the product or cause injury or electric
shock.
Care
•
Make sure to reattach the exhaust filter and pre-filter
back to the product after washing them. Using the
product with these filters will cause dust reach the
motor inside the product and cause malfunction.
Please note
•
Too much dust will deteriorate suction power; thus,
we recommend cleaning the filters before and after
cleaning.
※ Removing foreign object from inside the
product
In order to maintain product performance, be sure to
remove any foreign object and dust from inside of the
product (body, extension pipe, inlets).
Product body
Foreign object
Extension pipe
Foreign object
Inlet port
Foreign object
To Next Page
Loading...
Need help?
General
