-19-
How to use
Cleaning floor/carpet inlets
Please clean the floor and carpet inlets as follows:
1
Remove the inlet from the product.
2
Put the inlet port upside down and turn the ro-
tating brush removal screw counterclockwise.
•
Use a coin or a flat head screwdriver to turn the
screw.
Rotating the brush
removal screw
3
Pull the brush in the direction of the arrow to
remove it.
①
②
4
Attach the blade-shaped inlet to the body and
remove dust/foreign object from the brush and
the bottom of the inlet<?>.
Rotating
brush
5
Use wet towel or tissue to move any remaining
foreign object and dust from the brush and the
bottom of the inlet port.
Rotating
brush
6
Assemble the brush in reverse order after clean-
ing.
①
②
Care
•
Avoid getting your finger stuck in a gap.
•
Do not wash the rotating brush and the inlet port with
water.
•
Do not use the rotating brush as a mop.
•
Do not use the inlet port to absorb any liquid.
Cleaning the bedclothes inlet
1
Remove the inlet and put it upside down.
2
Attach the blade-shaped inlet to the body and
remove dust/foreign object from the bottom of
the inlet<?>.
3
Use wet towel or tissue to move any remaining
foreign object and dust.
Warning
•
Do not wash the inlet port with water.
•
Do not suck in any liquid including water with the inlet
port.
To Next Page
Loading...
