LG D2342P - Self Image Setting Function; AUTO Function

11
ENG
ENGLISH
USING THE MONITOR SET

WhenyouwanttousetwoPCinourMonitor,
pleaseconnectthesignalcable(D-SUB/
DVI-D/HDMI)respectivelyinMonitorset.

IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.

Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.

"Self Image Setting" Function.
Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)

‘AUTO’ Function.
Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
NOTE NOTE

Connectthesignal
inputcableandtighten
itbyturningthescrews
clockwise.

Donotpressthescreenwithyourfingerfor
alongtimeasthismayresultintemporary
distortiononthescreen.

Avoiddisplayingafixedimageonthe
screenforalongperiodoftimetoprevent
imageburn.Useascreensaverifpossible.
CAUTION
SelfImageSettingFunction
Pressthepowerbuttononthefrontpaneltoturn
thepoweron.Whenmonitorpoweristurnedon,
the "Self Image Setting" Functionisexecuted
automatically.(OnlysupportedinAnalogMode)
ENG.indd 11 2011-04-05 �� 1:20:38