LG D2342P - Display image issues; Unrecognized monitor message

17
ENG
ENGLISH
TROUBLESHOOTING
Display image is incorrect
Thescreencolorismonoor
abnormal.


Checkifthesignalcableisproperlyconnectedanduseascrewdriver
tofastenifnecessary.


Makesurethevideocardisproperlyinsertedintheslot.


Setthecolorsettinghigherthan24bits(truecolor)atControl Panel
►Settings.
Thescreenblinks.


Checkifthescreenissettointerlacemodeandifyes,changeittothe
recommendresolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Haveyouinstalledthedisplay
driver?


BesuretoinstallthedisplaydriverfromthedisplaydriverCD(or
diskette)thatcomeswithyourdisplay.Or,youcanalsodownloadthe
driverfromourwebsite:http://www.lg.com.


MakesuretocheckifthevideocardsupportsPlug&Playfunction.

CheckControl Panel ► Display ► Settingsandseeifthefrequencyortheresolutionwere
changed.Ifyes,readjustthevideocardtotherecommendresolution.

Iftherecommendedresolution(optimalresolution)isnotselected,lettersmaybeblurredandthe
screenmaybedimmed,truncatedorbiased.Makesuretoselecttherecommendresolution.

ThesettingmethodcandifferbycomputerandO/S(OperationSystem),andresolutionmentioned
abovemaynotbesupportedbythevideocardperformance.Inthiscase,pleaseasktothecomputer
orthevideocardmanufacturer.
CAUTION
ENG.indd 17 2011-04-05 �� 1:20:43