LG D2342P - Button descriptions

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Power Indicator

Lighting On: Turned on

Lighting Off: Turned off
Button(Seep.12)
Button Description
MENU Accessesthemainmenus.(Seep.13)
OSD LOCKED/
UNLOCKED
Thisfunctionallowsyoutolockthecurrentcontrolsettings,so
thattheycannotbeinadvertentlychanged.
PressandholdtheMENUbuttonforseveralseconds.
Themessage"OSDLOCKED"shouldappear.
YoucanunlocktheOSDcontrolsatanytimebypushing
theMENUbuttonforseveralseconds.Themessage"OSD
UNLOCKED"shouldappear.
SUPER ENERGY
SAVING Button
UsethisbuttontoenterSUPERENERGYSAVINGmenu.For
moreinformation.(Seep.15)
3D 3Ddisplaysettings.(Seep.14)
AUTO Whenadjustingyourdisplaysettings,alwayspresstheAUTObuttonontheMONITOR
SETUPOSD.(OnlysupportedinAnalogMode)
The best display mode 1920x1080
VOLUME(OnlyHDMImode) AdjustthevolumeoftheMonitorset.(Seep.14)
INPUT Youcanchoosetheinputsignal.


Whentwoinputsignalsareatleastareconnected,youcanselecttheinputsignal
(D-SUB/DVI/HDMI)youwant.


Whenonlyonesignalisconnected,itisautomaticallydetected.Thedefaultsettingis
D-SUB.
EXIT ExittheOSD(OnScreenDisplay).
(PowerButton)
Turnsthepoweronoroff.
Power Indicator Thepowerindicatorstaysblueifthedisplayisrunning
properly(OnMode).IfthedisplayisinSleepMode,thepower
indicatorblinksblue.
ENG.indd 5 2011-04-05 �� 1:20:34