Need help?Do you have a question about the LG DR385 and is the answer not in the manual?
Power| power requirements | AC 200-240V, 50/60 Hz |
|---|---|
| power consumption | 15W |
Operating Environment| operating temperature | 5˚C to 35˚C |
|---|---|
| operating humidity | 5% to 65% |
Audio Specifications| audio recording sampling frequency | 48kHz |
|---|---|
| compression format | Dolby Digital |
| frequency response DVD (PCM 48 kHz) | 8 Hz to 22 kHz |
| frequency response CD | 8 Hz to 20 kHz |
| frequency response DVD (PCM 96 kHz) | 8 Hz to 44 kHz |
| signal-to-noise ratio | More than 100 dB |
| harmonic distortion | Less than 0.008% |
Video Specifications| antenna input | 75 ohms |
|---|---|
| video input | 1.0 Vp-p 75 ohms, sync negative |
| video output | 1 Vp-p 75 Ω, sync negative |
| component video output (Y) | 1.0 V (p-p), 75 Ω, sync negative |
| component video output (PB/PR) | 0.7 V (p-p), 75 Ω |
| digital audio output | 0.5 V (p-p), 75 Ω |
| analog audio output | 2 Vrms (1 kHz, 0 dB), 600 Ω |
Recording Specifications| recording format | DVD Video Recording, DVD-VIDEO |
|---|---|
| recordable media | DVD-RW, DVD-R, DVD+RW, DVD+R |
| recordable time DVD (4.7GB) XP mode | Approx. 1 hour |
| recordable time DVD (4.7GB) SP mode | 2 hours |
| recordable time DVD (4.7GB) LP mode | 4 hours |
| recordable time DVD (4.7GB) EP mode | 6 hours |
| recordable time DVD (4.7GB) MLP mode | 11 hours |
| video recording sampling frequency | 27MHz |
| compression format | MPEG2 |
Weight and Dimensions| dimensions | 430 x 49 x 245 mm |
|---|---|
| net weight | 2.6 kg |
Warns about electric shock, laser radiation, and ventilation requirements.
Provides precautions for safe use and handling of the power cord.
Guides on how to properly dispose of the old appliance.
Declares compliance with EMC and Low Voltage directives.
Explains the function of each button on the remote control.
Instructions for connecting via SCART and to an antenna.
Details on connecting the power cord and antenna to the TV.
Explains how to connect using component video and analog audio cables.
Details digital audio output and AV IN 3 jack connections.
Instructions for connecting a satellite or cable decoder for viewing/recording.
Guides on connecting VCRs or other devices to the AV2 DECODER jack.
Guides through initial setup of language, clock, and channels.
Covers editing channels, program lists, and AV input settings.
Details how to access and navigate the main setup menu options.
Outlines how to select recording mode, channel, and start/stop recording.
Guides on setting, managing, and canceling timer recordings.
Addresses common problems with power, picture, sound, and remote control.
Covers issues like playback failure, disc compatibility, and recording errors.
Troubleshoots problems with playing specific file formats like MP3, DivX, etc.
To Next Page
