LG E1942C User Manual

Setting up the Monitor set
Attaching the Stand
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.

This illustration depicts the general model of
connection. Your monitor may differ from the
items shown in the picture.

Do not carry the product upside down holding
only the stand base. The product may fall
and get damaged or injure your foot.
CAUTION
CAUTION
Detaching the Stand
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
2
2
Attach the Stand body and then attach the Stand
Base,then tighten the screw to the right with a
Coin.
Stand Base
2
3
Stand Body
Turn the screw to the left with a Coin, and then
pull out the Stand Base from the Stand Body,
then pull out the
Stand Body
from the Monitor
set .
Stand Base
2
3
Stand Body
5
ENG
ENGLISH
ASSEMBLING AND PREPARING

LG E1942C Specifications

General

3D	No
HD type	-
Aspect ratio	16:9
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 61 kHz
Viewing angle, vertical	65 °
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	90 °
Display brightness (typical)	200 cd/m²
Supported graphics resolutions	1366 x 768
DVI-D ports quantity	0
Certification	FCC-B CE
Product color	Black
Tilt angle range	-5 - 20 °
Panel mounting interface	75 x 75 mm
AC input voltage	100 - 240 V
Power consumption (standby)	0.3 W
Power consumption (typical)	15 W
Package depth	339 mm
Package width	505 mm
Package height	115 mm
Package weight	3200 g
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions

Depth (with stand)	168 mm
Height (with stand)	349 mm
Weight (with stand)	2100 g
Depth (without stand)	55 mm
Width (without stand)	441 mm
Height (without stand)	275 mm
Weight (without stand)	1900 g