Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
2
Connect the AC-DC Adapter and Power Cord to
wall outlet.
3
Press (Power) button on the bottom switch
panel to turn the power on.
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
CAUTION
10 cm
10 cm
10 cm
10 cm
Using the cable holder
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
⬉⑤䕧ܹ
DC-IN
/
or
Cable holder
To Next Page
Loading...
