LG E1942C User Manual


Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.

If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.

Use only an authorized LG wall mount
and contact the local dealer or qualified
personnel.

Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.

Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.

Use the screws that are listed on the VESA
standard screw specifications.

The wall mount kit will include an installation
manual and necessary parts.

The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.

The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.

For more information, refer to the
instructions supplied with the wall mount.
CAUTION
NOTE
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2
If you use screw longer than standard, the
monitor might be damaged internally.
3
If you use improper screw, the product might be
damaged and drop from mounted position. In
this case, LG Electronics is not responsible for
it.
4
VESA compatible.
5
Please use VESA standard as below.

784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm

787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad
and screws.
10 cm
10 cm
10 cm
10 cm
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Model
VESA (A x B)
75 x 75
Standard screw M4
4Number of screws
E1642C
E2242C
E2042C
E1942C

LG E1942C Specifications

General

3D	No
HD type	-
Aspect ratio	16:9
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 61 kHz
Viewing angle, vertical	65 °
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	90 °
Display brightness (typical)	200 cd/m²
Supported graphics resolutions	1366 x 768
DVI-D ports quantity	0
Certification	FCC-B CE
Product color	Black
Tilt angle range	-5 - 20 °
Panel mounting interface	75 x 75 mm
AC input voltage	100 - 240 V
Power consumption (standby)	0.3 W
Power consumption (typical)	15 W
Package depth	339 mm
Package width	505 mm
Package height	115 mm
Package weight	3200 g
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions

Depth (with stand)	168 mm
Height (with stand)	349 mm
Weight (with stand)	2100 g
Depth (without stand)	55 mm
Width (without stand)	441 mm
Height (without stand)	275 mm
Weight (without stand)	1900 g