30
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
① Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
② Taking ou the screw of the TSG.
[F1❋03FDS]
To Next Page
Loading...
Need help?
General
