LG Flatron F700P - Adjustment Procedures (Continued); Color and Luminance Calibration; Focus Adjustment

- 14 -
11) Display color 15,0 box pattern(70x70mm) at mode 4.
12) DRIVE ADJ command.
13)Set B-DRIVE to 100 at DRIVE of the alignment
program.
14)Adjust R-DRIVE and G-DRIVE command to white
balance x=0.283 ± 0.003 and y=0.298 ± 0.003 on
the White Balance Meter with PC arrow keys.
15)Adjust SUB-CONTRAST command to 47±1FL of
the raster luminance.
15) Display color 15,0 full white patten at Mode 4.
16) COLOR ADJ. → LUMINANCE → ABL command.
17) Adjust ABL to 32 ± 1FL of the luminance.
18) Exit from the program.
6. Adjustment for Focus.
1)
Display H character in full screen at Mode 4.
2)
Adjust two Focus control on the FBT that focus
should be the best condition.