11
INSTALLATION
Before Installation
Dimensions and Clearances
Too small of a distance from adjacent items may
result in the degradation of freezing capability and
increased electricity costs. Allow over 50 mm of
clearance from each adjacent wall when installing
the appliance.
A
C
H
D E
F
G
B
- Type A (mm) Type B (mm)
A 912 912
B 1790 1790
C 927 738
D 797 615
E 877 690
F 922 733
G 1384 1180
H 1713 1750
NOTE
• You can determine what type of appliance it is
by looking at the label inside the appliance.
Ambient Temperature
• The appliance is designed to operate within
a limited range of ambient temperatures,
depending on the climate zone.
• The internal temperature could be affected
by the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
• The climate class can be found on the rating
label.
Climate Class
Ambient Temperature
Range ºC
SN (Extended
Temperate)
+10 - +32
N (Temperate) +16 - +32
ST (Subtropical) +16 - +38
T (Tropical) +16 - +43 / +10 - +43*
*Australia, India, Kenya
NOTE
• The appliances rated from SN to T are intended
to be used at an ambient temperature between
10 ºC and 43 ºC.
Accessories
*1:This feature is only available on some models.
a
Spanner A*1
b
Spanner B*1
c
Water Filter*1
d
Water Tube*1
e
Tube Connector and Clip*1
f
Tube Connector and Valve*1