30
ENGLISH
Using the Magic Remote Control
• Shake the Magic Remote slightly to the right and
left or press , (INPUT) buttons to make the
pointer appear on the screen.
• If the pointer has not been used for a certain period
of time or Magic Remote is placed on a flat surface,
then the pointer will disappear.
• If the pointer is not responding smoothly, you can
reset the pointer by moving it to the edge of the
screen.
• The Magic Remote depletes batteries faster than a
normal remote due to the additional features.
• Use the remote control within the specified range (within 10 m). You may
experience communication failures when using the device outside the
coverage area or if there are obstacles within the coverage area.
• You may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may cause
communication failures.
• The Magic Remote may not work properly if a wireless router (AP) is within
1 m of the projector. Your wireless router should be more than 1 m away
from the projector.
• Do not disassemble or heat the batteries.
• Do not drop the battery. Avoid extreme shocks to the battery.
• Inserting a battery in the wrong way may result in explosion.
To Next Page
Loading...
Need help?
General
