39
ENGLISH
MAINTENANCE
Clean your Projector to keep it in optimal condition.
Cleaning
Cleaning the Lens
If there is any dust or staining on the lens surface, you must clean the lens.
To remove dust or stains on the lens, use a compressed air duster, cotton swab, or
soft cloth to gently wipe the lens.
Do not wipe the lens while the product is in use or immediately after it has been
turned off.
When cleaning the lens, do not use a cleanser, automobile or industrial shiner,
abrasive, wax, benzene, alcohol, water, etc., as this may damage the product.
Cleaning the Projector Case
To clean the projector case, rst unplug the power cord.
To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish the
lens.
Do not use alcohol, benzene, thinners, or other chemicals, which may damage the
case.
To Next Page
Loading...
Need help?
General
