LG HLX56S - Speaker Pairing and Lock Settings; Connect Wireless Speakers; Lock Menu and Password

31
System Setting
3
Connect wireless speakers
When the unit is manufactured, the ID is already
set. If interference occurs or you use a new wireless
unit, an ID should be set again.
When the [Wireless Speaker Connection Guide]
appears, press the PAIRING button on the rear of
the wireless subwoofer.
-
If you see the blue LED indicator light on the
wireless subwoofer, the pairing was successful.
Select the [Speaker test] to test the connection.
[LOCK] Menu
The [LOCK] settings aect only CinemaNow movie,
BD and DVD playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (
b
)
to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER (
b
)
to create a new password.
[Change]
Enter the current password and press ENTER
(
b
). Enter a 4-digit password twice, and press
ENTER (
b
)
to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
If you make a mistake before pressing ENTER
(
b
), press CLEAR. Then input the correct
password.
,
Note
System Setting