R
Rebecca McbrideAug 29, 2025
How to fix LG HT502THW when it has no power?
- JJoshua McmillanAug 30, 2025
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
To Next PageTo Next PageHow to fix LG HT502THW when it has no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why can't I tune into radio stations on my LG HT502THW?
If radio stations cannot be tuned in on your LG Receiver, ensure the antenna is securely connected. If the signal strength is weak, try tuning in the station manually. If no stations are preset, preset the stations.
How to fix LG HT502THW remote control not working?
If your LG Receiver remote control isn't working correctly, here are some things to check: * Make sure you're pointing the remote control directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote control within a reasonable distance, about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
What to do if the LG HT502THW Receiver remote control does not work properly?
If the remote control for your LG Receiver isn't working, make sure you're pointing it directly at the receiver's remote sensor. Also, ensure you're within about 23 feet (7 meters) of the receiver. Remove any obstacles that might be blocking the signal. If it still doesn't work, try replacing the batteries with new ones.
How to fix if nothing is displayed on the front panel of my LG Receiver?
Press DIMMER on the remote control of your LG Receiver.
How to fix LG HT502THW when there is no power?
If your LG Receiver isn't powering on, make sure the power cord is securely plugged into the wall outlet.
What to do if nothing is displayed on the front panel display of my LG Home Theater System?
To resolve this, press DIMMER on the remote control.
Why is there no sound from my LG Home Theater System, or why is the sound very low?
If you're experiencing no sound or very low sound, there are a few potential causes. First, ensure the equipment connected with the audio cable is set to receive the DVD audio signal output by selecting the correct input mode on the receiver. Second, check that the audio cables are securely connected. Third, verify that the equipment connected with the audio cable is turned on. Finally, the audio connecting cable may be damaged, and you should try replacing it.
What to do if my LG Home Theater System remote control does not work properly?
If the remote control isn't working correctly, ensure that it is pointed at the remote sensor on the DVD/CD Receiver and that you are within a 23 ft (7 m) range. Also, check for any obstacles between the remote and the receiver. If the issue persists, replace the batteries with new ones.
What to do if LG HT502THW remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
General
