What causes loud hum or noise from LG HT902PB and how to fix it?
If you're hearing a loud hum or noise from your LG Receiver, consider the following: * The disc may be dirty, so try cleaning it. * The speakers and components might be poorly connected; ensure they are securely connected. * The DVD/CD Receiver might be too close to the TV; move the TV away from the audio components.
How to fix LG HT902PB Receiver when radio stations cannot be tuned in?
If you're having trouble tuning into radio stations with your LG Receiver: * Ensure the antenna is securely connected and properly positioned. * If using automatic tuning, the signal strength of the stations might be too weak; try tuning in the station manually. * If tuning by scanning preset stations, ensure stations have been preset; if not, preset the stations.
How to troubleshoot no picture on LG HT902PB Receiver?
If you're not getting a picture from your LG Receiver, try the following: * Make sure the TV is set to the correct video input mode to receive the DVD signal output. * Check that the video cable is securely connected to the jacks. * Ensure that the connected TV is powered on.
Why is there no sound from my LG HT902PB Receiver?
If you're experiencing no sound or very low sound from your LG Receiver, here are a few things to check: * Ensure the equipment connected with the audio cable is set to receive the DVD audio signal output. Select the correct input mode on the receiver. * Verify that the audio cables are securely connected to the jacks. * Make sure the equipment connected with the audio cable is turned on. * Check the audio connecting cable for damage and replace it if necessary.
How to fix LG Receiver when it has no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
How to fix loud hum or noise heard from LG Receiver?
If you're experiencing a loud hum or noise from your LG Receiver, try cleaning the disc first. If that doesn't solve the issue, make sure the speakers and components are securely connected. Also, try moving the TV away from the audio components, as they might be too close together.
Why is there no picture from my LG HT902PB?
If you're not getting any picture on your TV from the LG DVD/CD Receiver, first, ensure your TV is set to the correct video input mode so it can receive the DVD signal. Next, check that the video cable is securely connected to both the receiver and the TV. Finally, make sure your TV is turned on.
What to do if LG HT902PB remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
To Next Page
General
